Products Categories
Your Cart
Your shopping cart is empty!
TSC-6200E
The Model 6200E Total Sulfur Analyzer for continuous monitoring of TSC in CO2 as per ISBT Method 13.0. Includes an Oxidative Converter Module and an Analysis Module that are 19" Rack Mount configuration.
| Ranges: | 0 - 50 ppb to 0 - 20,000 ppb full-scale, user selectable; dual ranges and auto-ranging supported |
| Zero Noise: | < 0.2 ppb |
| Span Noise: | < 0.5% of reading (above 50 ppb) |
| LDL: | 0.4 ppb |
| Zero Drift: | <0.5 reading / 24 hours; 1 ppb / 7 days |
| Span Drift: | <0.5% reading / 24 hours; 1% of reading / 7 days |
| Lag Time: | 20 seconds |
| Rise Time (95%): | < 120 seconds |
| Linearity: | 1% of full scale |
| Sample Flow Rate: | 700 cc/min ± 10% |
| Converter Temperature: | 1000°C |
| Converter Efficiency: | > 98% above 0°C dewpoint |
| Converter Life: | 3000 ppm hours |
| SOx Scrubber Efficiency: | > 98% |
| SOx Scrubber Life: | > 1000 ppm hours |
| Operating Temperature: | 5 to 40°C |
| Power: | 100 VAC or 240 VAC, 50/60 Hz (user specified) |
| Outputs: | Analog: 10V, 5V, 1V, 100mV (selectable) (4 - 20 mA isolated output optional) RS232 (I\O): Standard DB9 Digital Status: 12 contact closure outputs |
| Size (H x W x D): |
Model 6200E analyzer: |
Support Gases:
- Hydrogen Carrier gas (Ultra Pure) Fuel Gases:
- Zero Air
- Requires dry zero-air support gas at 450 cc/min
Basic CO2 software method is pre-programmed by Airborne Labs International as default. Certified laboratory back-up testing also available for result confirmation.
Optional Accessories:
- Hydrogen Generator
- Zero Air Generator
- Digitial Flow Meter
- Hydrogen Leak Detector
- Certified Gas Standards
- Pressure Regulators and transfer lines
